Finder User Guide | www.flashforge.com 0086-0579-82273989
26
After installing the filament, put the cartridge back to the printer.
4.2 Printer Start-up
(4-3)Insert the power supply into the power input on the back of the Finder and plug
the power cord into an electrical outlet.
(4-4) Press the starter button to start the device.
4.3 Loading Filament
For stable filament loading and proper device protection, you need to install the
filament guide tube properly.
(4-5) Take out the filament guide tube, thread the filament from the filament
cartridge through the tube.
4-5
43
44
To Next Page
Loading...
