Finder User Guide | www.flashforge.com 0086-0579-82273989
6
gloves away from moving parts.
Do not operate the device while you are tired or under the influence of drugs, ĺ
alcohol or medication.
·Cautions
Do not leave the device unattended for long.ķ
Do not make any modifications to the ĸdevice.
To lower the build plate before loading/unloading filament. (The distance between Ĺ
the nozzle and build plate should be kept for at least 50mm)
Operate the device in a wellĺ-ventilated environment.
Never use the device for illegal activities.Ļ
ļ Never use the device to make any food storage vessels.
Never use the device to make any electrical appliance.Ľ
Never put the model into your mouth.ľ
Do not remove the models with force.Ŀ
· Environment Requirements
Temperature: RT 15-30ć
Moisture: 20%-70%
· Filament Requirements
Do not abuse the filament. Please make sure you use the Flashforge filament or the
filament from the brands accepted by Flashforge.
· Filament Storage
All polymers degrade with time. Do not unpack until filament is needed. Filament
should be stored atclean and dry conditions.
To Next Page
Loading...
