Finder User Guide | www.flashforge.com 0086-0579-82273989
60
Print When Slice Done: If you print via USB cable, you can check the box, while if
you print via USB, you should not check the box.
Machine Type: Flashforge Finder
Supports: If you print a model with supports, you should click the inverted triangle
and select [Enable].
Raft: You are suggested to select [Enable].
Resolution: You are suggested to select [Standard]
More Options: You are suggested to keep them default.
Click
[OK] to select the path to save the Gcode file. You can rename the file as you
like and save it as a .g or .gx file, click
[Save] to generate a Gcode file.
7-6
Note: .gx files are available for preview while the .g files are not. They are displaying
as follows:
g. Files gx. Files
7-7
To Next Page
Loading...
