09
6. Click [Tools]-[Setting] in turn to enter pages like this,
turn to page two, and click [Move].
Network Preheat
Setting
About
8. Open the front door, take out the paper
box inside the printer, and printer unpacking
is completed.
Build
Tools
Filament
Status Language
Calibration Homing
Move Camera
Filament Check
1/3 2/3
Led
7. Click the UP arrow in the
page to raise the extruder
for removing the bottom
paper box easier.
x
z
Y
X: 20.00 Y: 45.00 Z: 36.00
To Next Page
Loading...
