Flashforge Adventurer 5M Pro - Cloud Printing Options

The IP address can be viewed by long-pressing the connected network or in the Printer Info
interface by clicking [ ] - [ ].
4.3.3 Printing via Cloud
1. Click [ ] - [ ], turn on the FlashCloud
switch, and view the registration code.
2. Open the FlashCloud website and register an account. After email activation, you can log in and
use. FlashCloud: https://cloud.sz3dp.com/
3. Click [My Printer] - [Add Printer]. On the Add Printer page, enter the registration code (cloud
registration code) and name the printer. After clicking [OK], the information will appear on the
printer's FlashCloud interface.
Printing via FlashCloud
24