Flashforge Adventurer 5M Pro - Software Introduction and Installation; Slicing Software Overview

Note
3. Software Introduction & Installation
Before printing 3D model files, you need to configure slicing presets for the corresponding printer.
Recommended slicing software: OrcaSlicer / FlashPrint 5
Before reading the brief instructions, please ensure you have reviewed the Quick
Start Guide and completed the first print.
Slicing Software Instructions for Adventurer 5M Series
Pre-printing Steps:
Obtain the 3D file
(STEP/STL/OBJ)
Download and
install the slicing
software
Use the slicing software
to convert the file into
the machine-readable
format
Import the sliced file via
a USB flash drive or
network transfer to the
printer for printing
This slicing software, created by the open-source community, offers more open configuration
options. Experienced users are recommended to use this slicing software.
1. Download the latest slicing software from the official website:
https://github.com/SoftFever/OrcaSlicer/releases.
2. Find the OrcaSlicer software package on the USB flash drive and install the version that matches
your system.
Files can be imported by project, requiring a click on the project file each time you open it.
Alternatively, configs can be imported, eliminating the need to do so each time, but this may not
be compatible with higher software versions.
Open-source Slicing Software
OrcaSlicer
01 02 03 04
Download and Installation Instructions
Note
14