15
ToolsPreheatBuild
1. Tap [Build]. 2. Tap [Local memory] to choose print files.
3. Choose the preset print file [PG.gx]. 4. Tap [Build].
5. The printer starts to heat up and will start printing after heating completed.
<
None
6834Mb2.7Mb
PG.gx
PG
Total: 1 hr 48 min
Build Copy Delete
PG
1 hr 48 min Time left
30℃
0
30℃
30℃
Left Extruder Mode
Before the first printing, please complete the leveling, loading and calibration correctly
under the guidance of the quick start guide.
To Next Page
Loading...
