Flashforge Foto 13.3 - Page 19

18
CHITUBOX V1.8.1
File List
Settings
Slice
Select All
X
Z
Y
untitled*
Solid
X-Ray
1. Install and turn on the ChiTuBox64.exe
program.
3. Move the model to the right position through movement and rotation. The
model cannot be lower than the mesh surface above the raft.
2. Click the【Open...】in the menu at
the upper left corner to select the
model files.
CHITUBOX V1.8.1
Open Project
Save ProJect
Open...
Save As...
X:
Y:
Z:
0.00
0.00
0.00
Put on the plate
Centered
Reset
X:
Y:
Z:
+90°
+90°
+90°
Flatten by face
Reset
-90°
-90°
-90°
0.00
0.00
0.00
CHITUBOX