Flashforge Guider - Platform Positioning and Layout

Guider User Guide | www.ff3dp.com
49
⑥
Delete
Select the object and delete the object through the following two methods:
Method 1: Click [Edit]--[Delete]
Method 2: Press the shortcut Delete
⑦ Surface to Platform
After selecting the model, you can make the model surface to platform via the
following operation.
Click [Edit]--[Surface to Platform] into surface to platform mode(As
shown in the picture)
（Surface to Platform）
⑧Auto Layout All
Click [Edit]--[Auto Layout All] after loading one or more than one models, all
models will be placed automatically as automatic placement rule.