Flashforge Inventor II - First Print

09
First Print
1. Please insert the USB stick into Inventor II. In the print interface, tap [Build]-[USB Stick].
2. Select [40mm_Box-PLA.gx].
3. Tap [Build].
4. Once heated, the printer will start printing automatically.
Internal Memory
USB Stick
Build Preheat Tools
Flashprint切片软件
40mm_Box-PLA.gx
1/1
Build Copy Delete
40mm_Box-PLA
Total：0hr 54min
Extruder
40mm_Box-PLA
40℃ / 220℃
Time left：0hr 54min
MorePauseAbort