Angle grinder L3206C, L3208C, L4206C
15
For your safety
Danger!
Before using the angle grinder, please read
and follow:
– these operating instructions,
– the ”General safety instructions” on the
handling of power tools in the enclosed
booklet (leaflet-no. 315.915/04.04),
– the currently valid site rules and the
regulations for the prevention of
accidents.
This angle grinder is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The angle
grinder may be operated only if it is
– used as intended,
– in perfect working order.
Faults which impair safety must be repaired
immediately.
Noise
Caution
Wear ear protection at a sound pressure
above 85 dB(A).
Measured according to EN 50144:
:
Vibration
Weighted effective value of acceleration
according to EN 50144: 7 m/s²
Intended use
This angle grinder
– is designed for industrial applications,
– for dry grinding and cutting metal and
stone with rough wheels and cutting-off
wheels which are permitted to operate at
a circumferential speed of 80 m/s,
– for surface grinding metal and stone with
tapered cup wheels up to 110 mm in
diameter which are permitted to operate
at a circumferential speed of 50 m/s,
– for surface grinding with sanding sheets
on a backing pad which has been
designed to operate at the speed of the
machine.
– for derusting and cleaning with cup
brushes which have been designed to
operate at the speed of the machine.
– for use with grinding tools and
accessories which are indicated in these
instructions or recommended by the
manufacturer.
Not permitted are e.g. chain cutting wheels,
saw blades.
Sound pressure
L
PA
Sound power L
WA
dB(A) dB(A)
L3206C 90 103
L3208C 90 103
L4206C 87 100
Heft_5.book Seite 15 Mittwoch, 23. Februar 2005 4:15 16
To Next Page
Loading...
Need help?
General
