Angle grinder L3206C, L3208C, L4206C
22
Guarantee
FLEX will provide the end consumer of
a newly purchased power tool with a 2-year
manufacturer’s guarantee commencing on
the date the power tool is purchased.
The guarantee covers only defects which
can be attributed to a material and/or
production fault as well as non-performance
of warranted characteristics. When making
a claim under the guarantee, enclose the
original sales receipt with purchase date.
Repairs under the guarantee may be carried
out only by workshops or service centres
authorised by Flex. A claim may be made
under the guarantee only if the power tool
has been used as intended. The guarantee
excludes in particular operational wear,
improper use, partly or completely
dismantled machines as well as damage
caused by overloading the machine, use of
non-permitted, defective or incorrectly used
application tools. Damage which is caused
by the machine on the application tool
or workpiece, use of force, consequential
damage which can be attributed to improper
or inadequate maintenance on the part
of the customer or a third party, damage
caused by external effects or foreign
objects, e. g. sand or stones, as well
as damage caused by non-observance
of the operating manual, e. g. connection to
an incorrect mains voltage or current type.
Claims for insertable tools or accessories
can only be made under the guarantee
provided they are used with power tools for
the intended or permitted use.
Exemption from liability
The manufacturer and his representative
are not liable for any damage and lost profit
due to interruption in business caused
by the product or by an unusable product.
The manufacturer and his representative
are not liable for any damage which was
caused by improper use of the power tool
or by use of the power tool with products
from other manufacturers.
Heft_5.book Seite 22 Mittwoch, 23. Februar 2005 4:15 16
To Next Page
Loading...
Need help?
General
