FLUXUS F70x 13 Libraries
122 UMFLUXUS_F7V4-6-2EN, 2017-10-01
13.1.1 Data Retention During the Partitioning of the Coefficient Memory
When the coefficient memory is repartitioned, max. 8 data sets of each type can be retained.
13.2 Input of Material/Medium Parameters Without the Extended Library
To enter the material/medium parameters as constants, the extended library has to be deactivated.
The parameters of a user-defined material/medium can be entered now.
The input of a material or a medium is almost identical. Therefore, displays for a medium will only be shown and described
in case of differences.
The occupancy of the coefficient memory is displayed for a few seconds.
Select yes to start the partitioning. Press ENTER.
The coefficient memory is partitioned accordingly. This procedure takes a few seconds.
After the partitioning, Format USER-AREA is displayed again.
Example 1: The number of user-defined materials is reduced from 5 to 3. The data sets #01 to #03 are retained.
The data sets #04 and #05 are deleted.
Example 2: The number of user-defined materials is increased from 5 to 6. All 5 data sets are kept.
Select Special Funct.\SYSTEM settings\Libraries\Extended Library.
Press ENTER.
Select off to deactivate the extended library. Press ENTER.
Select Special Funct.\Install Material or Install Medium. Press ENTER.
This error message will be displayed if the coefficient memory does not contain an area for
user-defined materials/media.
Partition the coefficient memory accordingly (see section 13.1).
Select edit. Press ENTER.
Select a user-defined material/medium. Press ENTER.
Change the designation of the material/medium.
The default name for a user-defined material/medium is USER MATERIAL N or USER ME-
DIUM N with N being an integer.
Note! 95 ASCII characters (letters, capital letters, numbers, special characters [!? " + - ( ) > < % * etc.]) are
available for the designation of materials/media.
A designation can have max. 16 characters. The input of text is described in section 4.5.
Libraries ↕
Format USER-AREA
Libraries ↕
Extended Library
Special Funct. ↕
Install Material
USER Material
NOT FORMATTED !
Install Material
>EDIT< delete
USER Material ↕
#01:--not used--
EDIT TEXT (↑↓← →
USER MATERIAL 1
To Next Page
Loading...
Need help?
General
