O P E R A T I O N C H A P T E R 6
Figure 162: Hardware Installation Warning
Click on the Continue Anyway button to complete the installation.
Configure the VCOM Port Pairs
By default VCOM will install 4 COM port pairs. To view these pairs, to change the default or to remove
the driver, locate and start the VCOMConfigurator application (Start All Programs).→
Figure 163: VCOMConfigurator Application
This will open the following screen (Figure 164).
[The rest of this page has been left blank intentionally]
181 2003-2008 FlexRadio Systems
To Next Page
Loading...
