P O W E R S D R I N S T A L L A T I O N & S E T U P C H A P T E R 2
Figure 22: Optimization Routine
Click OK and let the routine run.
Note: This routine aims to optimize the FFT calculations for the environment
(hardware and software) in which the calculations will be performed.
For optimal performance, you should therefore close all applications
you will normally not be running simultaneously with PowerSDR. The
routine will save a file called wisdom to the directory in which
PowerSDR resides. If you wish to run FFTW again, delete this file from
the directory and start up PowerSDR, or simply run the
fftw_wisdom.exe file in the PowerSDR directory.
When the routine has completed, a brief startup sequence will follow, after which you should be
greeted by the PowerSDR Setup Wizard as shown in Figure 23 below.
[The rest of this page has been left blank intentionally]
39 2003-2008 FlexRadio Systems
To Next Page
Loading...
