FLIR Blackfly S - 5.4 Interface Connectors

To Next Page

To Previous Page

5 BlackflyS Physical Interface

5.4 Interface Connector

5.4.1 Ethernet Connector

Cased models—The 8-pin RJ-45 Ethernet jack is equipped with two (2) M2 screwholes for secure connection. Pin

assignments conform to the Ethernet standard.

Board-level models—The camera is equipped with a GigETF38 connector that is used for data transmission, camera

control, and power.

Hirose TF38 high-speed FPC connector

Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

VPOE VPOE TRXN3 GND TRXP3 GND TRSN2 GND TRXP2 GND TRXN1 GND TRXP1 GND TRXN0 GND TRXP0 GND

GigE TF38 Pin Assignments

Power over Ethernet (PoE)

Boad-level cameras can support PoE. You can purchase a separate add-on adapter or design your own.

To use PoE, an Ethernet power injector or a powered Ethernet switch must be connected to the camera. The PoE

conforms to the IEEE 802.3af-2003 standard.

5.4.2 USB3.1 Connector

Cased models—The camera is equipped with a USB 3.1 Micro-B connector that is used for data transmission, camera

control and power. For more detailed information, consult the USB 3.1 specification available from

http://www.usb.org/developers/docs/.

USB 3.1 Micro B Connector

USB 3.1 Micro-B Connector Pin Assignments

Pin Signal Name Description

1 VBUS Power

2/19/2019

Integrated Imaging

Solutions Inc.

FLIR Blackfly

S Installation Guide 19