FLIR Blackfly S - Contacting Us; Revision History

6 Input/Output Control
6.4 Output Timing Characteristics
Note: Timing specifications are preliminary and subject to change.
Output Timing Characteristics
Non-isolated Output Performance (measured at Vcc = 5 V, Rext = 1 kΩ)
Parameter Symbol Non-isolated
Output Low Voltage V
L
0.23 V
Output High Voltage V
H
4.95 V
Output Threshold High Voltage V
THH
4.48 V
Output Threshold Low Voltage V
THL
0.7 V
Cycle Rise Time t
R
2.6 μs
Cycle Fall Time t
F
0.23 μs
Opto Current 4.8 mA
Opto-isolated Output Performance (measured at Vcc = 3.3 V, Rext = 200 Ω)
Opto-isolated
Parameter Symbol Load No Load
Output Low Voltage V
L
1.3875 V 1.41 V
Output High Voltage V
H
2.80625 V 3.26 V
Output Threshold High Voltage V
THH
2.66 V 3.08 V
Output Threshold Low Voltage V
THL
1.53 V 1.60 V
Cycle Rise Time t
R
5.04 μs 6 μs
Cycle Fall Time t
F
3.18 μs 3.66 μs
Opto Current 2.094 mA 7.96 mA
2/19/2019
©2015-2019 FLIR
Integrated Imaging
Solutions Inc.
All rights reserved.
FLIR Blackfly
®
S Installation Guide 41