FLIR Blackfly S - 6.3 Input Timing Characteristics

6 Input/Output Control
Color Pin Line Function Description Parameters Min Max Unit
Green 4 3 GPIO3
Non-isolated Input/Output
(USB3)
Input Low Level 0 1.4 V
Input High Level 2.6 24 V
Propagation Delay 1 µs
Output Low Current 25 mA
Output High Level 0 24 V
Brown 5 N/A GND Camera Power Ground
Red 6 N/A Vout Camera Power Output
Output Voltage 3.05 3.35 V
Output Current 120 mA
Color Pin Line Function Description Parameters Min Max Unit
Orange 1 0 GPIO0 Non-isolated Input/Output
Input Low Level 0 1.4 V
Input High Level 2.6 24 V
Propagation Delay 1 µs
Output Low Current 25 mA
Output High Level 0 24 V
Black 2 1 GPIO1 Non-isolated Input/Output
Input Low Level 0 1.4 V
Input High Level 2.6 24 V
Propagation Delay 1 µs
Output Low Current 25 mA
Output High Level 0 24 V
White 3 2 GPIO2 Non-isolated Input/Output
Input Low Level 0 1.4 V
Input High Level 2.6 24 V
Propagation Delay 1 µs
Output Low Current 25 mA
Output High Level 0 24 V
Green 4 N/A VExt Camera Input Power (GigE) 4.0 5.5 V
Brown 5 N/A GND Camera Power Ground
Red 6 N/A Vout Camera Power Output
Output Voltage 3.05 3.35 V
Output Current 120 mA
Board-level GigE
For Cased Models—Power can also be provided externally through the GPIO interface: 12 V nominal (8 - 24 V). Power
consumption is 3W maximum.
2/19/2019
©2015-2019 FLIR
Integrated Imaging
Solutions Inc.
All rights reserved.
FLIR Blackfly
®
S Installation Guide 35