FLIR Blackfly S - 6.4 Output Timing Characteristics

6 Input/Output Control
Operating Range
Description Minimum Maximum
Opto-isolated Input Voltage 0 V 30 V
Opto-isolated Output Voltage 0 V 24 V
Opto-isolated Output Current 25 mA
3.3 V Output Current 120 mA
Opto-isolated External Voltage Resistor Combinations
External
Voltage
External
Resistor
OPTO_OUT
Low Voltage
OPTO_OUT
High Voltage
Output Current
No Load
Output Current
With Load
3.3 V 200 Ω 1.41 V 3.225 V 7.96 mA 2.094 mA
5 V 1.0 kΩ 0.86 V 5.06 V 4.06 mA 2 mA
12 V 2.4 kΩ 0.96 V 12.08 V 4.64 mA 2.46 mA
24 V 4.7 kΩ 0.9 V 24 V 5.08 mA 2.64 mA
30 V 4.7 kΩ 1.1 V 30 V 7.08 mA 2.86 mA
Values are for reference only
Opto-isolated input circuit
2/19/2019
©2015-2019 FLIR
Integrated Imaging
Solutions Inc.
All rights reserved.
FLIR Blackfly
®
S Installation Guide 37