13
Configuring Remote Connection
Step 3 of 6: Locate your camera’s MAC address:
1. Open a web bro
wser and enter the camera’s IP address in the address
bar in the following format:
http://192.168.0.120:80
IP address
Colon
HTTP port number
http://
2. Under User Name and Password, enter the camera’s User Name
(default: admin) and Password (default: admin) and click Login.
3. Click De
vice Info and write down the MAC Address.
Step 4 of 6: Register for FLIR DDNS:
FLIR offers a free DDNS service for use with your IP camera. A DDNS
account al
lows you to set up a web site address that points back to your local
network. The following outlines how to set up your free DDNS account.
NOTE: Y
our router must support UPnP to enable DDNS.
NO
TE: You may use the same DDNS account for multiple IP cameras on
the same LAN.
To Next Page
Loading...
