59
Resetting to Factory Defaults
7. RESETTING TO FACTORY DEFAULTS
Follow the steps below to revert all settings to factory defaults. The camera
must be connected to power to perform a factory reset.
1.
Open the service
compartment near the
camera base by loosening
the screws (2x) with the
included allen key.
2. Pr
ess and hold the black
r
eset button for 5 seconds
then release the button to
reset the camera to factory
defaults.
3. Close the service
compartment and firmly
tighten the screws (2x)
To Next Page
Loading...
