36
Web Configuration
3. Click Schedule to configure a motion detection schedule. The Schedule
Time Setting menu opens.
NOTE: If the Schedul
e
Time Setting menu does not open, disable any popup
blockers.
4. Configure the weekly schedule. The schedule is divided into 3 periods,
and motion detection will be enabled in all times during all 3 periods.
5. Click Motion Ar
ea, and configure up to 8 motion detection areas:
• Select Area Motion or Ar
ea Mask to configure motion detection areas.
• Area Motion allows you to select areas where motion detection is enabled.
• Area Mask enables the entire image for motion detection, and allows you
to select areas to disable motion detection.
• Right-click to delete the last created area.
6. Under Sensitivity, sel
e
ct the sensitivity for motion detection: Low,
Medium, or High.
7. Click OK to save your settings.
To Next Page
Loading...
