11
Camera Installation
6a.
Adjust camera viewing angle and secure into
place by tightening thumb screw using a flat head
scr
ewdriver.
Avoid pointing the camera lens in
angles where the IR LEDs are
blocked by the camera cover or dome
cover. If IR LEDs are blocked, it may
result in an unclear nighttime image.
6b.
Adjust zoom and focus as required.
NOTE: Lens adjustment l
evers are by default
in the locked position. Turn counterclockwise
to unlock. Tighten levers to secure lens
setting.
6c. (Optional) Insert a microSD c
ard into the
camera. To enable recording, you must
format the microSD card and configure
microSD recording (see “8.9.1 Record
Directory” on page 44
).
NOTE: The ca
mera supports microSD cards
up to a maximum size of 64GB. SanDisk™ or
Kingston™ brand microSD cards are
recommended.
6d. Re-att
ach the camera cover, using the
thumb scr
ew as a guide, until it snaps into
place.
To Next Page
Loading...
