427-0026-01-10, version 110 Oct 2010 23
7 Mounting Templates
7.1 Camera Mounting Template.
(2.47”)
62.7mm
Camera View Direction
4X on 88.9 mm (3.50") bolt circle
5.1 mm (0.20") for machine screw
(2.47”)
1/4” x 20 mounting hole
clocking-pin hole
62.7mm
Caution: When you print this document from the .pdf file,the
installation templates may not be to scale. Be sure to check
the dimensions prior to cutting any holes.
For installation purposes, a tear out version of this page
is located at the very back of this manual.
To Next Page
Loading...
