427-0026-01-10, version 110 Oct 2010 25
7 – Mounting Templates
7.2 Joystick Control Unit Mounting Template.
DRILL 6.4 mm (0.25”) for
5.50”
(5.20”)
(2.375”)
threaded stud six places
CUT for JCU
(1.35”)
(1.25”)
(1.25”)
60.325mm
31.75mm
34.3mm
132mm
139.7mm
31.75 mm
Caution: When you print this document from the .pdf file,the
installation templates may not be to scale. Be sure to check
the dimensions prior to cutting any holes.
For installation purposes, a tear out version of this page
is located at the very back of this manual.
To Next Page
Loading...
