3 – Getting Started
6 Oct 2010 427-0026-01-10, version 110
3.3 Installation
DO NOT separate the Camera from its base during installation.
PatrolIR B is designed for commercial, over-the-road, automotive
applications. While many other applications are possible, each user
should carefully consider additional protection and installation
methods that might be required for a given application.
Mechanical, environmental and electrical requirements should be
evaluated to assure that the PatrolIR B can be utilized with
satisfactory results. Particular attention needs to be given to the
electrical system that will power the PatrolIR B as the unit is
designed for the automotive 12VDC power environment and
conforms to ISO 7637-2 requirements for transients and
disturbances on the typical automotive power system.
If the PatrolIR B is installed in applications other than commercial
automobiles, additional power conditioning or protection may be
required.
Caution! The PatrolIR B should be installed by a trained
professional. Incorrect installation could void your warranty.
To Next Page
Loading...
Need help?
General
