FLIR PatrolIR B - Page 33

Full size Joystick Control Unit Mounting Template
Tear out here
CUT for JCU
(2.375”)
60.325mm
(1.25”)
31.75mm
(1.35”)
34.3mm
(1.35”)
34.3mm
DRILL 6.4 mm (0.25”) for
threaded stud six places
(5.20”)
132mm
(1.25”)
31.75 mm
Caution: When you print this document from the .pdf file,the
installation templates may not be to scale. Be sure to check
the dimensions prior to cutting any holes.