FLIR Saros DM Series

Installation
7
427-0200-00-12 Revision 100
November 2019
This document does not contain any export-controlled information.
Seal the cable entry hole of the outdoor mounting kit (see figure below) with thread seal tape to keep water
from entering the camera.
Sealing Cable Entry Hole
2.4 Mounting the Camera
The following accessories and adapters are available for mounting the camera:
· Wall Mount Bracket CX-ARMX-G3
· Wall Mount Bracket with Power Box CX-ELBX-G3
· Gooseneck Mount with Power Box CX-GSNK-G3
· Corner Adapter CX-CRNR-G3
· Pole Adapter CX-POLE-G3
2.4.1 Wall Mount Bracket CX-ARMX-G3
Wall mount bracket (1.5 inch threaded).
Item
Details
Qty
Wall mount bracket
CX-ARMX-G3
1
Parts package
No. 3 Allen key
1
Quick install guide
Summarized below
1