User interface
8
The camera supports the following application modes:
• Air mode is used for localization of pressurized air leaks.
• Power mode is used for localization and classification of high-voltage parti-
al discharges.
The available functions, settings, and real-time analysis information in the
user interface depend on the selected application mode.
An example of the graphical user interface of the camera is shown below.
8.1 Heatmap
The main view of the user interface shows the camera image with a heatmap
overlayed on top. The heatmap shows the location of the strongest sound
source (single-source mode) or multiple sound sources (multi-source mode).
There are two different types of color modes for displaying the heatmap.
#T810536; r. AB/63437/63437; en-US
12
To Next Page
Loading...
