Handling the camera13
5. Carefully push the lens into position.
6. Rotate the lens 30° clockwise (looking at the front of the lens).
13.8 Removing an additional infrared lens
Note Do not touch the lens surface when you mount an infrared lens. If this happens,
clean the lens according to the instructions in 28.2 Infrared lens, page 162.
When you have removed the lens, put the lens caps on the lens immediately, to protect it
from dust and fingerprints.
13.8.1 Procedure
Follow this procedure:
1. Push the lens release button to unlock the lens.
#T559879; r. AO/35410/35410; en-US
28
To Next Page
Loading...
