Handling the camera13
6. Rotate the lens cap 30° clockwise (looking at the front of the lens).
13.9 Attaching the sunshield
13.9.1 Procedure
Follow this procedure:
1. Align the two front tabs of the sunshield with the corresponding two notches at the top
of the screen.
2. Push the front part of the sunshield into position. Make sure that the two tabs mate with
the corresponding notches.
3. Carefully hold together the two rear wings of the sunshield.
#T559879; r. AO/35410/35410; en-US
30
To Next Page
Loading...
