EasyManua.ls Logo

Floe VSD6000 - Maintenance and Troubleshooting; Inspections and Maintenance Schedule

Default Icon
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
OPTIONAL LED FLOODLIGHT
An optional LED lighting package is available for the lift. The lighting package is mounted on the
wireless receiver post and plugs into the receiver. The wireless remote receiver plugs into the Radio
Remote” socket on the lift’s Advance Control System. Installation instructions are included in the light kits.
The 120 LED oodlight is about equivalent to a 75 watt incandescent. There are two bulbs per kit.
Pulleys with worn bushings can cause damage
to the beam where they are located and
cause excessive friction while the lift is being
operated. This can also severely damage other
components such as the drive train and cables.
WARNING
Do not use a boat lift with cables that show
any abnormalities. If a cable breaks under
pressure, the boat will drop suddenly causing
potential damage to the boat, the boat lift, and
can cause serious injury or death.
WARNING
INSPECTIONS & MAINTENANCE
• Check all structural fasteners annually to ensure that they are tight.
Inspect all cables at least annually. Any frayed, deteriorating
or visibly stressed cables must be re-
placed before the lift is used.
• Check all seven pulleys (sheaves) annually to make sure they are turning free and true. Ensure that
the cables are running properly in the grooves or channels of the pulleys. Check the bushings or any
signs of wear. If there is too much vertical play at the top and bottom of a pulley on its axis, (more
than
an 1/8”), replace the bushing, and if necessary, the sheave itself.
See Figs. 67 & 68.
Visually inspect lift frame annually for cracks or damage. Replace any cracked or damaged parts
before using lift.
If the lift receives wind damage or is moved or blown over by the wind, a full inspection (preferably by a
trained FLOE dealer or other knowledgeable professional) must be completed before the lift is used.
• Grease lift as outlined in this manual. See Fig. 71 on the following page.
Fig. 66: Wireless remote
is an optional feature. The
wireless remote control will
operate both the lift and the
lighting system.
(Sold separately)
Fig 67
Pulley with proper vertical
orientation on its axis
Fig 68
Pulley with too much
side-to-side play
(not vertically
aligned)
Exterior Lighting
Lift
Light Kit

Other manuals for Floe VSD6000

Related product manuals