STRADA GENERATION3 – S5 - INSTALLATION MANUAL
13/66
Equipment Description / Notes
Standard toolbox
A standard toolbox should at least include:
sets of screwdrivers (flat, Phillips, Torx),
a set of flat keys and sockets (8 to 24),
a set of hexagonal keys (Allen),
a ratchet,
a pair of cutting pliers,
a spirit level,
a measuring stick,
a cutter knife.
Rotary hammer
Drill bit Ø20 Min. length: 30cm
Swab
Compressed air
Rubber mallet
Chemical anchoring
kit
Not included
Anchoring kit for flat
ground with a Large
base
The anchoring kit includes the following elements:
a Large base
16 M16 nuts
4 M16 washers
4 M16 threaded rods
(length: 31 cm)
an anchoring protective
plate
To Next Page
Loading...