INSTALLATION INSTRUCTIONS
16
3. INSTALLATION (authorized personnel)
3.1 Reference standard
Install in accordance with local building and electrical codes.
This appliance meets the requirements of:
Standard(s) –
American National Standard/CSA Standard for Gas Water Heaters Volume III, Storage Water Heaters With Input Ratings
Above 75,000 Btu per Hour, Circulating and Instantaneous.
Conforms to ANSI STD Z21.10.3, certified to CSA STD
4.3.
Failure to install a gas appliance correctly and in accordance with the above norms could lead to prosecution. It is in the
interest of the installer and safety that the law is complied with.
The manufacturer’s instructions form an integral part of the installation and should be left with the appliance but do not
over ride in anyway statutory obligations.
Installation requirements
Please refer to local and national standards in force with the Country of destination of the product.
To Next Page
Loading...