flsun QQ-S - Software Setup and First Print; Install Slicing Software (Cura); Prepare and Start First Print

Software Installation
B
Use Part
B-2-4
1.Slice
2.Machine Operation
1.Dual click to install Cura
3.Click Settings→Printer→Add Printer→FLSUN QQ→Add Printer→Finish
2.Open Cura
Open Cura
Insert SD card
Click PRINT Automatic printingChoose file
Click Load to load
STL file
Software auto-slice ,
save Gcode to anywhere
First Printing
B
Use Part
B-2-5
15
16