flsun SuperRacer - Touch Screen Instruction

10. Click “Print”
11. Select the
Gcode file and
click “Print”
12. Printing will
start
automatically
Touch Screen Instruction
Select a gcode file
to print
Heat: One-key preheating
Extrude: Extrude filaments
Move: Move XYZ axis
separately
Change: Change
filament
Auto
-Level: Auto levelling
page
Language: Switch display
language
Motor Off: Unlock
motor
Fan: Control the speed
of the turbofan
Restore: Restore
factory settings
You can find the
firmware version, print
size, UI version and
contact information on
the information page
Homepage
Cumulative printing time