flsun SuperRacer - Printing Page; Runtime Adjustments: Speed and Z-Axis

Click the white input
box to enter the
temperature of the
nozzle and hot bed
Click the up and down
buttons to adjust the
printing speed. When
the printing speed
exceeds the speed
allowed by the printer,
the quality may
deteriorate.
Cllick the up and down
buttons to adjust the
fan spe
ed
Full Speed: Turbofan
runs at full speed
Half Speed: Turbofan
runs at half speed
Turn Off: Turn Off
Turbofan
Click Z
-
0.05 and Z+0,05
to adjust the height of
Z
during printing
Instataneous
printing speed
Printed height
Printing Page