14
Troubleshooting
Skipping
• Ensure the record surface is clear of dirt and debris. Also check that the record is
not warped or deformed.
• Inspect the stylus for built up dirt or debris. Use a stylus cleaning brush to clean if
necessary.
• Ensure the turntable is on a sturdy and level surface.
• Use instructions in step four of the first time setup instructions to confirm the
tonearm was balanced correctly and set to the correct tracking force of 2.0 Grams.
• Check that the anti-skating control is set to 2.
Audio Feedback
• If audio feedback occurs ensure the speakers are positioned away from the
turntable. The turntable should not be placed in front of the speakers.
• For best audio performance the dust cover should be removed during playback.
Cueing Lever Not Lowering Tonearm
• Use instructions in step four of the first time setup instructions to confirm the
tonearm was balanced and set to the correct tracking force of 2.0 Grams.
• Lock the tonearm and lower the cueing lever. Gently press down on the tonearm
bridge until fully lowered to reset the tonearm lowering mechanism.
Low Volume
• Ensure the Preamp switch is set correctly. If using the internal Preamp the switch
should be set to LINE.
• Check the RCA connections are correct and fully inserted.
• If low volume persists more information is available at: www.fluance.com/support
Need Additional Help?
• Do not return this product to the store.
• Please contact a Fluance Customer Support Representative first, regarding any
additional information on product features, specifications or assitance with setup.
• Online web chat or Support: www.fluance.com/support
To Next Page
Loading...
