Fluance RT80 - Installing the Counterweight; Installing the Headshell

20 pages

To Next Page

To Previous Page

First Time Setup

Step Two:

Installing the Counterweight

Step Three:

Installing the Headshell

1. Secure the tonearm using the

tonearm lock.

1. Remove the headshell from the

protective packaging and insert

into the end of the tonearm.

2. Slide the counterweight onto the end

of the tonearm with numbers facing

forward until it clicks on.

2. Tighten the locking nut until the

headshell is secure.

Tonearm Lock

Tonearm

Locking Nut

Headshell

Counterweight

Other manuals for Fluance RT80