Fluidmaster K-507A-008 - User Manual

K-507A-008
ADJUSTABLE 2˝ FLUSH VALVE REPAIR KIT
HOW-TO VIDEO
VISIT: FLUIDMASTER.COM
K-507A-008 PRODUCT PAGE
VIDEO
HELPFUL
TOOL INCLUDED!
SPANISH - Page 19

Fluidmaster K-507A-008 Specifications

General

Material	Plastic
Adjustable Height	Yes
Universal Fit	Yes
Model Number	K-507A-008
Brand	Fluidmaster
Compatibility	Most 2-inch flush valves
Category	Plumbing
Color	White

Summary

K-507 A-008 ADJUSTABLE 2 FLUSH VALVE REPAIR KIT

STEP 1: PREPARE TANK

A: TURN OFF WATER

Instructions on how to shut off the water supply to the toilet.

STEP 2: REMOVE OLD PARTS

STEP 3: INSTALL FLUSH VALVE

B: INSERT FLUSH VALVE INTO TANK HOLE

Positioning the new flush valve correctly within the tank.

C: USE RULER ON THE RED WRENCH TO MEASURE AND ADJUST NEW FLUSH VALVE

Measuring and adjusting the flush valve height using a tool.

D: ADJUST FLUSH VALVE HEIGHT

Fine-tuning the height of the flush valve for proper function.

STEP 4: INSTALL TANK-TO-BOWL GASKET

STEP 4: GASKET FOR GERBER TOILETS

STEP 4: GASKET FOR KOHLER TOILETS

E: SECURE TANK TO BOWL

Aligning and attaching the toilet tank to the bowl using bolts.

F: SLIDE ONE METAL WASHER ONTO EACH BOLT

Installing washers and tightening hex nuts to secure the tank.

STEP 5: SECURE TANK TO BOWL

C: SECURE TANK ONTO BOWL

Attaching the toilet tank to the bowl and tightening securely.

STEP 6: FINISHING STEPS

D: TURN ON WATER

Restoring water supply and checking for leaks.

E: WATER LEVEL

STEP 7: FINE-TUNE FLUSH

A: TEST FLUSH

B: ADJUST FOR MOST EFFICIENT FLUSH

Adjusting the flush valve dial for optimal flushing efficiency.

C: FINAL SETTING

STEP 8: FLUSH THE TOILET

A: FLUSH THE TOILET

TROUBLESHOOTING

WATER LEVEL IN BOWL IS TOO LOW

Diagnosing and fixing low water levels in the toilet bowl.

WATER LEVEL IN TANK MAY BE TOO LOW

Addressing insufficient water levels within the toilet tank.

C: FLAPPER MAY BE CLOSING TOO SOON

Troubleshooting a flapper that closes prematurely.