106/107
Users Manual
10
Table 2. Display
Item Description Item Description
High voltage Frequency is selected
Display Hold is enabled Farads
Continuity selected Millivolts
Diode test is selected Amps or volts
Duty Cycle is selected Dc or ac voltage or current
Decimal prefix Auto Range mode is enabled
Ohms is selected Low battery. Replace battery.
Auto Power Off
The Product automatically powers off after 20 minutes of inactivity.
To restart the Product, turn the rotary switch back to the OFF position and then to a
necessary position.
To disable the Auto Power Off function, hold down the YELLOW button when turning on the
Product, until PoFF shows on the display.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
