Fluke 107 - Maintenance; General Maintenance; Test the Fuse; Replace Batteries and the Fuse

106/107
Users Manual
20
Maintenance
Beyond replacing the batteries and fuse, do not attempt to repair or service the Product
unless you are qualified to do so and have the relevant calibration, performance test, and
service instructions. The recommended calibration cycle is 12 months.
 Warning
To prevent possible electrical shock, fire, or personal injury:
• Remove the input signals before you clean the Product.
• Use only specified replacement parts.
• Use only specified replacement fuses.
• Have an approved technician repair the Product.
For safe operation and maintenance of the Product, repair the Product before use
if the batteries leak.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com