Fluke 107 - Test the Fuse; Replace Batteries and the Fuse

106/107
Users Manual
22
Test the Fuse
1. Turn the rotary switch to
 (106 does not have ).
2. Plug a test lead into the  terminal and touch the probe to the A terminal.
• A good A terminal fuse is indicated by a reading less than 0.1 Ω.
• If the display reads , replace the fuse and test again.
• If the display shows any other value, have the Product serviced. See Service and
Parts.
Replace Batteries and the Fuse
To replace the batteries or the fuse, see Figure 5.
 Caution
Be sure to observe Electro Static Discharge precautions.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com