Fluke 12 User Manual

12 Multimeter
TURNING BEEPER OFF
23
TURNING BEEPER OFF
To disable all beeper functions, press and hold down [Z] for 2 seconds while turning
the meter on.
MAINTENANCE
WWarning
To avoid electrical shock or damage to the meter, do not get water inside the
case. Remove the test leads and any input signals before opening the case.
Periodically wipe the case with a damp cloth and detergent. Do not use abrasives or
solvents.
N Replacing the Battery
The meter uses a 9 V battery (NEDA 1604 or IEC 6F22). To replace the battery,
remove the four screws from the back of the meter and lift off the front. Remove the
battery from case bottom.
Replacing the Test Leads
The meter uses double-insulated test leads. When replacing the test leads, order
Fluke PN 855742 only.

Fluke 12 Specifications

General

Continuity Beeper	Yes
Diode Test	Yes
Safety Rating	CAT III 600 V
Operating Temperature	0 °C to 50 °C
Display Type	LCD
Voltage DC	600V
Voltage AC	600V
DC Current Range	10 A
AC Current Range	10 A
Resistance Range	40 MΩ
Battery Type	9V
Dimensions	169 mm x 84 mm x 44 mm