Fluke 12 User Manual

12 Multimeter
Users Manual
24
Service and Parts
This meter should be serviced only by a qualified service technician. To order the
service manual (PN 900824) and other parts or for service information, in the USA call
1-800-825-9810. Outside the USA, contact the nearest Fluke service center.
Accessories
When using accessories, put the slide-switch in the volts position, and manually select
the 4000 mV range for ease of reading.
SPECIFICATIONS
This meter complies with Part 15 of FCC Rules. Operation is subject to the following
conditions: (1) This meter may not cause harmful interference, and (2) this meter must
accept any interference received, including interference that may cause undesired
operation.
Accuracy is specified for a period of one year after calibration, at 18 °C to 28 °C (64 °F
to 82 °F) with relative humidity to 90 %. AC conversions are ac-coupled, average
responding, and calibrated to the rms value of a sine wave input. Accuracy
Specifications are given as:
±([% of reading] + number of least significant digits])

Fluke 12 Specifications

General

Continuity Beeper	Yes
Diode Test	Yes
Safety Rating	CAT III 600 V
Operating Temperature	0 °C to 50 °C
Display Type	LCD
Voltage DC	600V
Voltage AC	600V
DC Current Range	10 A
AC Current Range	10 A
Resistance Range	40 MΩ
Battery Type	9V
Dimensions	169 mm x 84 mm x 44 mm