Fluke 1529 - Display:window? [MIN|MAX|DEF]; Display:window <Num>|Min|Max|Def; Display:window<N>:Field<N>:Feed; Display:window<N>:Field<N>:Feed <Chn>[,<Num>]

8.4.6.7 DISPlay:WINDow? [MIN|MAX|DEF]
Returns the current display set.
DISP:WIND?
2
Specifying the MIN parameter returns a value of 1. Specifying the MAX pa
-
rameter returns a value of 9. Specifying the DEF parameter returns a value of 1.
8.4.6.8 DISPlay:WINDow <num>|MIN|MAX|DEF
Sets the current display set.
DISP:WIND MIN
The <num> parameter specifies the display set to select. Specifying MIN,
MAX, or DEF parameter sets the current display set to the minimum, maxi
-
mum, or default respectively.
8.4.6.9 DISPlay:WINDow<n>:FIELd<n>:FEED?
Returns the current setting of the specified field for the specified display set.
DISP:WIND1:FIEL2:FEED?
0,16
The WINDow suffix, <n>, specifies the display set (1 to 9). The FIELd suffix,
<n>, specifies the field (1 to 8) within the display set. The response consists of
two numbers separated by a comma. The first number represents the channel
associated with the field. The second number represents the parameter to be
displayed in the specified field. See Table 5 on page 122, Field Types, for the
field types.
8.4.6.10 DISPlay:WINDow<n>:FIELd<n>:FEED <chn>[,<num>]
Sets the specified field within the specified display set.
DISP:WIND1:FIEL3:FEED 0,10
The WINDow suffix, <n>, specifies the display set (1 to 9). The FIELd suffix,
<n>, specifies the field (1 to 8) within the display set. The <chn> parameter
specifies channel (1 to 4) associated with the field. The <num> parameter spec
-
ifies the parameter to be displayed in the specified field. See Table 5 on page
122, Field Types, for the field types.
8.4.7 Logging Commands
The logging commands are used for logging data automatically and on demand.
8.4.7.1 LOGging:AUTomatic:DELete [<num>|ALL]
Deletes entries from the auto log.
103
8 Digital Communications Interface
Commands