4 Quick Start
This section briefly explains the basics of setting up and operating your 1529
Thermometer Readout.
4.1 Unpacking
Carefully unpack the 1529 thermometer readout. Verify that the following
items are present:
•
1529 Thermometer Readout (The battery inside the 1529 is completely
charged when shipped. Initial charging is not required.)
•
AC Adapter/Charger and power cord
•
Serial Cable
•
User’s Guide
• Report of Calibration with calibration label
• Probe (optional-must be purchased separately)
• Two ferrites (for use with probes as described in Section 4.4.1, Using the
Clamp-on Ferites)
If all items are not present, contact an Authorized Service Center (see Section
1.3)
4.2 Use Proper Care
You must understand the safety issues related to the 1529. Be aware that poten-
tial hazards exist due to high temperatures and battery chemicals. Carefully
read the Warnings in Section 1.2.1 and Cautions in Section 1.2.2.
The 1529 and any thermometer probes used with it are sensitive instruments
that can be easily damaged. Always handle these devices with care. DO NOT
allow them to be dropped, struck, stressed, or over-heated.
4.3 Learn About the Features and Components
Familiarize yourself with the features and accessories of the 1529 by reading
Section 5, Parts and Controls.
4.4 Connect the Probe
The PRT/thermistor or thermocouple probe connects on the back panel of the
1529 using patented mini-DWF connectors (PRT/thermistor) or the universal
receptacles (thermocouples).
11
4 Quick Start
Unpacking
To Next Page
Loading...
Need help?
General
