Fluke 1529 - Status Commands; Cls; Ese; *ESE <Num>|Min|Max|Def

8.4.12 Status Commands
The status commands are used for querying and setting the state of the instru
-
ment registers. For details on the operation of the status registers refer to the
IEEE-488.2 and SCPI standards.
8.4.12.1 *CLS
Clears the status registers.
*CLS
8.4.12.2 *ESE?
Returns the Event Status Enable Register.
*ESE?
255
8.4.12.3 *ESE <num>|MIN|MAX|DEF
Sets the Event Status Enable Register.
*ESE 48
8.4.12.4 *ESR?
Returns the Event Status Register.
*ESR?
0
8.4.12.5 *SRE?
Returns the Service Request Enable Register.
*SRE?
0
8.4.12.6 *SRE <num>|MIN|MAX|DEF
Sets the Service Request Enable Register.
*SRE 32
8.4.12.7 *STB?
Returns the Status Byte Register.
*STB?
200
1529 Chub-E4 Thermometer Readout
User’s Guide
118