The system reset does the following:
•
Sets the measure period to 1 second.
•
Sets channel 1 ON, all others OFF.
•
Sets the channel mode to SCAN.
•
Sets moving average to 1.
•
Sets printing to all ports OFF.
•
Stops auto logging.
•
Clears the statistical functions.
•
Sets units to C.
•
Sets the resolution to AUTO.
Reset does not affect any of the probe characterization parameters, logged data
or channel calibration parameters.
1529 Chub-E4 Thermometer Readout
User’s Guide
76
To Next Page
Loading...
