Fluke 1529 - Page 87

Command Description Refer To
FORMat:STAMp? Returns the extended measurement data format setting Section 8.4.1
FORMat:STAMp <bool> Enables extended measurement data format with the
FETCh?, MEASure?, and READ? commands
Section 8.4.1
INITiate Provided for compatibility but has no effect Section 8.4.2
INITiate:CONTinuous? Provided for compatibility but has no effect Section 8.4.2
LOGging:AUTomatic:COUNt? [MIN|MAX|DEF] Returns the number of entries to auto log Section 8.4.7
LOGging:AUTomatic:COUNt <num> |MIN|MAX|DEF Sets the number of entries to auto log Section 8.4.7
LOGging:AUTomatic:DELete [<num>|ALL] Deletes auto log entries Section 8.4.7
LOGging:AUTomatic:FREE? Returns the number of log entries free and stored Section 8.4.7
LOGging:AUTomatic:LABel? [MIN|MAX|DEF] Returns the current auto log label number Section 8.4.7
LOGging:AUTomatic:LABel <num> |MIN|MAX|DEF Sets the current auto log label number Section 8.4.7
LOGging:AUTomatic:POINt? [MAX] Returns the number of auto log entries Section 8.4.7
LOGging:AUTomatic:PRINt [<num>|ALL [,port]] Prints stored auto log data Section 8.4.7
LOGging:AUTomatic:STATus? Returns the auto log status Section 8.4.7
LOGging:AUTomatic:STATus <bool> Sets the auto log state Section 8.4.7
LOGging:AUTomatic:TIMe? [MIN|MAX|DEF] Returns the auto log interval setting Section 8.4.7
LOGging:AUTomatic:TIMe <num> |MIN|MAX|DEF Sets the auto log interval setting Section 8.4.7
LOGging:AUTomatic:VALue? <num> |MIN|MAX|DEF Returns an auto log reading Section 8.4.7
LOGging:DEMand:DELete [<num>|ALL] Deletes demand log entries Section 8.4.7
LOGging:DEMand:FREE? Returns the number of log entries free and stored Section 8.4.7
LOGging:DEMand:LABel? [MIN|MAX|DEF] Returns the current demand log label number Section 8.4.7
LOGging:DEMand:LABel <num> |MIN|MAX|DEF Sets the current demand log label number Section 8.4.7
LOGging:DEMand:POINt? [MAX] Returns the number of demand log entries Section 8.4.7
LOGging:DEMand:PRINt [<num>|ALL [,<port>]] Prints the demand log data Section 8.4.7
LOGging:DEMand:STORe Stores the current measurement into the demand log Section 8.4.7
LOGging:DEMand:VALue? <num> |MIN|MAX|DEF Returns a demand log entry Section 8.4.7
LOGging:LABel<n>:NAME? Returns the name of the specified label Section 8.4.7
LOGging:LABel<n>:NAME <label> Sets the name of the specified label Section 8.4.7
MEASure? [<chn>] Returns the most recent measurement on the specified
channel
Section 8.4.1
READ? [<chn>] Returns the most recent measurement on the specified
channel
Section 8.4.1
ROUTe:CLOSe? <chn> Returns the state of the specified channel Section 8.4.3
ROUTe:CLOSe <chn> Enables the specified channel Section 8.4.3
ROUTe:OPEN? <chn> Returns the state of the specified channel Section 8.4.3
ROUTe:OPEN <chn> Disables the specified channel Section 8.4.3
ROUTe:SCAN? Returns the list of enabled channels Section 8.4.3
ROUTe:SCAN [<chn list>] Sets the input channels for scanning Section 8.4.3
81
8 Digital Communications Interface
Interface Commands